Danfoss TP5000Si


The Danfoss TP5000Si is a programmable room thermostat that allows you to set a heating schedule for your home.

How to operate

  1. Turn the power on: Ensure that the power is turned on to your heating system and that the TP5000Si is receiving power. You should see the display light up when the power is on.
  2. Set the clock: The first thing you’ll need to do is set the clock on the TP5000Si. Use the arrow buttons to adjust the time and date.
  3. Set the desired temperature: Use the up and down arrows to set the desired temperature for your home.
  4. Program the schedule: The TP5000Si allows you to set different temperatures for different times of day. Press the “Prog” button to begin programming your schedule. Use the arrow buttons to set the desired temperature for each time period.
  5. Override the schedule: If you need to change the temperature temporarily, you can override the schedule by pressing the up or down arrow buttons. The override will last until the next programmed temperature change.
  6. Adjust advanced settings: The TP5000Si has several advanced settings that can be adjusted. These include settings for the heating system type, the time delay before the heating comes on, and the minimum and maximum temperature limits. Refer to the user manual for instructions on adjusting these settings.

Overall, the Danfoss TP5000Si is a straightforward and easy-to-use programmable thermostat. By setting a heating schedule, you can save energy and ensure that your home is always comfortable.


Technical information

Central heating control typeThermostat
Heating system compatibilityCompatible with a wide range of heating systems, including combi boilers, system boilers, and heat-only boilers.
Control operation– Seven-day programmable function with up to six temperature changes per day, allowing for custom heating schedules to be created based on the user’s requirements.
– Frost protection function to prevent freezing pipes during cold weather.
– Time and temperature settings are stored in non-volatile memory, ensuring that they are not lost in the event of a power outage.
– Automatic summer/winter time changeover function.
– Advance programming mode, allowing for quick and easy adjustments to the temperature settings.
Temperature range5°C to 35°C (in 0.5°C increments).
Display typeLarge backlit digital display.
Hertz (Hz)Designed to operate on a 230V AC, 50Hz power supply.
Switch rating3(1)A 230V AC
Max. load (Inductive)230W (1A x 230V)
Max. load (Resistive)690W (3A x 230V)
Power consumptionApproximately 2W when the backlight is on, and 1W when the backlight is off.
Dimensions94mm x 148mm x 35mm (H x W x D).
Battery backup2 x AA 1.5V alkaline batteries (included).
Programmer Voltage230V AC
Smart compatibilityNo Wi-Fi connectivity or the ability to connect to a home automation system. However, it can still be integrated into a smart home setup with the use of additional hardware.
Terminal capacity3 Amps. The total current drawn by all the devices connected to the thermostat terminals should not exceed 3 Amps.


User guide

User guide 2

Easy user guide

Installation instructions